The effect of hot fluorine defrosting on cold storage

Different from the general water defrosting and electric defrosting on the market, the front crown has a unique core technology of intelligent control of hot fluorine defrosting, which includes defrosting and no defrosting. Adopting fuzzy control defrosting, intelligent defrosting, defrosting time can be completed in 3 minutes. Defrosting saves 80% electricity, can be completed in 3 minutes, and has minimal fluctuations in storage temperature. The defrosting of the air cooler is timely, and the evaporation temperature is high during normal operation, resulting in significant energy-saving effects.

Hot fluorine defrosting:

Hot fluoride cream, with defrosting cream or no defrosting cream

Adopting fuzzy control defrosting and intelligent defrosting

Thawing time takes 3 minutes to complete

Defrosting saves 80% electricity

Short defrosting time and small fluctuations in storage temperature

The defrosting of the air cooler is timely, and the evaporation temperature is high during normal operation, resulting in significant energy-saving effects

Application:

The hot fluorine defrosting device (manual) is a device developed based on the principle of hot fluorine defrosting, which is easy to install, easy to operate, and one click defrosting. No need to install N solenoid valves.

Applicable:

Independent circulation system with single compressor and single evaporator. Not applicable to parallel, multi-stage, and stacked units.

advantage:

Connect once according to the diagram, simple installation operation, no need for power supply, safe operation, no need to stop the warehouse, no need to tamper with goods, no need to raise the temperature of the warehouse, no need to drop in ice state, and no need to wet inventory

Range:

Single compressor circulation system below 60P, small and medium-sized cold storage below 800 square meters, ice making equipment

effect:

Both steel and aluminum bars are available, combined with two fin aluminum bars for the best defrosting effect

characteristic:

1. Manual control of one key switch, simple and reliable, will not cause equipment failure due to misoperation.

2. Heating from the inside, the frost layer can melt at the junction with the pipe wall and fall, making the heat source highly efficient.

3. Defrost thoroughly and thoroughly, with over 80% of the frost layer falling off in a solid state.

4. Install directly on the condensing unit according to the diagram, with simple pipeline connection, without the need for other specialized accessories and power supply.

5. Based on actual differences such as frost layer thickness, it generally takes 30-150 minutes.

6. Compared to electric heating frost, it has a higher safety factor, less negative impact on cold room temperature, and minimal impact on inventory and packaging due to less water falling.

Shanghai KUB Refrigeration Equipment Co., Ltd.

Free Call Video Chat